Home / Products

Products

Showing 1–12 of 141 results

  •  

    Serie
    1 Robust, lightweight housing

    Hard-coated aluminum alloy

    2 Mounting and positioning

    mounting possible from several sides for versatile positioning

    3 Energy supply

    possible from several sides

    4 Gripper jaw

    individual gripper finger mounting

    5 Sensing slot

    mounting and positioning of magnetic field sensors

    6 Wedge hook mechanism

    synchronized the movement of the gripper jaws

    7 Integrated gripping force safety device

    spring integrated into cylinder as energy storage

    8 Position sensing

    permanent magnet for direct monitoring of piston movement

    9 Mounting block

    mounting for inductive proximity switch (10)

  • 2-Jaw Parallel Grippers
    Series GPP1000

  •  

    Serie
    1 Wedge hook mechanism

    Supports to absorb high forces and moments

    Synchronized gripper jaw movement

    2 Gripper jaw

    Gripper fingers mounted using removable centering sleeves

    Lubricated for life via incorporated lubrication slots

    3 Steel Linear Guide

    Steel in steel guide

    Enables use of extremely long gripper fingers

    4 Mounting block

    mounting for inductive proximity switch

    5 Integrated gripping force safety device

    Spring built into cylinder chamber as an energy store

    6 Drive

    Double-acting pneumatic rotor cylinder

    7 Mounting and positioning

    Alternatively, on several sides for customized mounting

    Pneumatic and electrical versions identical apart from height

    8 Sensing slot

    mounting and positioning of magnetic field sensors

    9 Dual lip seal

    IP64 and up to IP67 (with purged air) for Protector version

    Prevents grease from being squeezed out, increasing service life

  •  

    Serie
    1 Wedge hook mechanism

    high forces and moments capacity

    Synchronized gripper jaw movement

    2 Gripper jaw

    Gripper fingers mounted using removable centering sleeves

    Lubricated for life via incorporated lubrication slots

    3 Mounting block

    mounting for inductive proximity switch

    4 Integrated gripping force safety device

    Spring built into cylinder chamber as an energy store

    5 Sensing slot

    mounting and positioning of magnetic field sensors

    6 Mounting and positioning

    Alternatively, on several sides for customized mounting

    Pneumatic and electrical versions identical apart from height

    7 Drive

    Double-acting pneumatic rotor cylinder

    8 Steel Linear Guide

    Steel in steel guide

    Enables use of extremely long gripper fingers

    9 Dual lip seal

    IP64 and up to IP67 (with purged air) for Protector version

    Prevents grease from being squeezed out, increasing service life

    • Service:Liquid & Oil
    • Flow Range: 0.6~60 LPM
    • Wetted Parts Material:Body- Acrylic plastic; O-ring: Viton;
    • Float- magnet cover with PPS plastic; Connection- SS316;
      Spring- SS316
    • Connection Size: ⅜”, ½”, ¾”NPT female available
    • Mounting:Vertical and Horizontal available, various flow directions
    • Temperature & Pressure Limits:150psig (10bar) @100ºF (38ºC)
    • Temperature Limit:-24ºC~+54ºC
    • Accuracy: ±5% full scale
    • Alarm Switch:One or Two setting points, form A N.O. type bistable reed switch
    • Switch Rating:AC 125V 0.5A / DC 100V 10W / Max. DC 250V<40mA
    • Weight: 0.45~0.5 kg
    • (Contact setting point should be within 10% to 80% of F.S.)
    • Pneumatic Valve is utilized by compressed air to control the gate open and close.
    • It can be remote controlled and good for non-pressure environment or dirty water.
    • The air pressure setting of the air compressor shall be larger or equal to the inner fluid pressure of the pipe.
    • Meanwhile, it is utilized with piston and diaphragm which can be against the high pressure and dirt to keep valve’s long life.
    • There’s a cleaning opening that is easy for dirt cleaning.
    • The installed direction can be either vertical or horizontal.
  • Aluminum Foil Fiberglass Reflective Sleeve With Hook And Loop Fastener

    Aluminum Foil Fiberglass Reflective Sleeve with hook and loop fastener is used to produce an engineered solution for wire harnesses and other components in close proximity to engine and exhaust systems.
    • Size Range:15mm-100mm
    • Operating Temperature:-60℃-260℃
  • Angle Seat Valves

  • Back pressure chamber controls the valve gate and let gate respond, quickly and adjust pressure accurately.

  • Pressure Adjusting Range:
    1 kgf / cm2~5 kgf / cm2
    4 kgf / cm2~10 kgf / cm2
  • RFT Back pressure

Top